LS LOW SHRINK FOR FORMLABS – BLUECAST CASTABLE RESIN 0.5kg

£108.33 Inc VAT

 

LOW SHRINKAGE CASTABLE RESIN.

BC23LS is a new castable resin for FORMLABS, perfect for jewellery prints, where extreme accuracy and precision is required.

The main features are:

Very low shrinkage and High Accuracy

Minimal residue after burnout process (0.003%)

Low-exhaust emission during the burnout process

Virtually no expansion of resin during burnout process

Very low deformation post-printing

Exceptional hand workability

High definition of details and consistency of surfaces

Remarkable definition of micro-incisions and micro-reliefs, including the ability to create watermarks with a minimum thickness of 0.2mm

 

LS LOW SHRINK FOR LCD/ DLP – BLUECAST CASTABLE RESIN 0.5kg

£108.33 Inc VAT

 

LOW SHRINKAGE CASTABLE RESIN.

BC23LS is a new castable resin for LCD/DLP, suitable for jewellery where extreme precision and accuracy are required.

The main features are:

Very low shrinkage and high Accuracy

Minimal residue after burnout process (0.003%)

Low-exhaust emission during the burnout process

Virtually no expansion of resin during burnout process

Very low deformation post-printing

Exceptional hand workability

High definition of details and consistency of surfaces

Remarkable definition of micro-incisions and micro-reliefs, including the ability to create watermarks with a minimum thickness of 0.2mm

Compatible with Wanhao Duplicator 7

ORIGINAL CUSTOM MADE FOR ASIGA – BLUECAST CASTABLE RESIN 0.5kg

£108.33 Inc VAT

 

HIGH QUALITY CASTABLE RESIN

BlueCast Original is fully compatible with ASIGA Printers, comes with a special configuration ini file made by Asiga technicians.

The main features of the new BlueCast resin are: reduced bornout cycle, absence of residues, high details, smooth surfaces, fewer failed prints, cheaper than original FormLabs resin.

ORIGINAL FOR FORMLABS – BLUECAST CASTABLE RESIN 0.5kg

£108.33 Inc VAT

 

HIGH QUALITY CASTABLE RESIN

BlueCast Original is fully compatible whith Formlabs printer profiles (form1+, form2), doesn’t require modification to the printer and to the resin tank. For form2 use open profile.

The main features of the new BlueCast resin are: reduced bornout cycle, absence of residues, high details, smooth surfaces, fewer failed prints, cheaper than original FormLabs resin.

S+ UNIZ SLASH + – BLUECAST CASTABLE RESIN 0.5kg

£108.33 Inc VAT

 

HIGH QUALITY CASTABLE RESIN

BlueCast S + is specifically designed for the new Uniz Slash + 3d Printer.  Built off the existing proven formula for the Original BlueCast resin, with amazingly low shrinkage during printing and low deformation over time.  These specifications currently make BlueCast S + the only resin for the goldsmith jewelry industry compatible with the Slash + printer.  The use of BlueCast S + resin guarantees perfect prints and fusions for pave, watermarks, stone embossing, high end jewelry & silver design.

 

X10 FOR LCD/ DLP – BLUECAST CASTABLE RESIN 0.5kg

£108.33 Inc VAT

Introduction
BlueCast X10 is the evolution of our well known X5 polymer for direct
investment casting of jewelry and dental patterns. It’s a resin developed to
give perfect casting using wax equipment as well normal gypsum bonded
investments.
Main improvements can be listed in:
– better plate adhesion
– less shrinkage
– no ash even at lower temperature
– improved detail
As for our LS, Original and X5 resins, X10 is monomer free, this means no
harmful low molecular mass chemical you have to deal with. Even if X10 is
NOT carcinogenic, NOT toxic and safe, we strongly suggest users to wear
protective equipment as stated in MSDS because of presence small amount of
phosphine oxide that can result irritating.
X10 core is custom developed oligomer based on modified urethane backbone
functionalized by a methacrylic acid that exhibits the attitude to sublimate
(passing from solid to gas phase without liquid one) without volume expansion
and releasing during this phase CO CO2 and water.

X10 FOR SLA DLP – BLUECAST CASTABLE RESIN 0.5kg

£108.33 Inc VAT

Introduction
BlueCast X10 is the evolution of our well known X5 polymer for direct
investment casting of jewelry and dental patterns. It’s a resin developed to
give perfect casting using wax equipment as well normal gypsum bonded
investments.
Main improvements can be listed in:
– better plate adhesion
– less shrinkage
– no ash even at lower temperature
– improved detail
As for our LS, Original and X5 resins, X10 is monomer free, this means no
harmful low molecular mass chemical you have to deal with. Even if X10 is
NOT carcinogenic, NOT toxic and safe, we strongly suggest users to wear
protective equipment as stated in MSDS because of presence small amount of
phosphine oxide that can result irritating.
X10 core is custom developed oligomer based on modified urethane backbone
functionalized by a methacrylic acid that exhibits the attitude to sublimate
(passing from solid to gas phase without liquid one) without volume expansion
and releasing during this phase CO CO2 and water.

X5 FOR Formlabs and SLA- BLUECAST CASTABLE RESIN 0.5kg

£108.33 Inc VAT

 

X5 CASTABLE RESIN.

BCX5 is the latest castable resin for Formlabs and SLA, suitable for jewelry where extreme precision and accuracy are required.

The main features are:

– Custom syntetized oligomer by BlueCast, not available to market,
patent is going to be applied.
– Excellent casting of small engravings both positive and negative
– Fits all jewelry needs from filigree to medals as well dental ones
– Excellent for stones presetting
– Curing triggering tuned to maximize antialias smoothing
– No monomer inside, no smell
– No aggression on plastic parts (tested on PS, PMMA)
– No postcuring needed for casting
– No shrinkage
– No primer needed
– Less sprueing needed, oxygen for burnout is released by resin during
burnout (less scrap metal, less work on metal)
– Easy welding with wax, forget about pattern lost into investment
– Can be polished, engraved, drilled (postcure is needed)
– Low viscosity, easier to recover uncured resin from models, easy to wash
– No preheating required
– Very little hygroscopic while liquid, no water absorption while printed
– Atoxic, solvent free, very low phospine content, very low skin irritant
– Fast and detailed
– Hard but elastic, good compression set
– Cleaner burnout, 0,00% ash residual
– Solvent free
– Suitable for fast burnout
– Full burnout also at lower temperature (750 C°)
– No expansion during burnout, sublimation starts at 130 Celsius
– Burnout will not release agrressive chemicals to investment (80% of
burnout is composed by carbon dioxide and water and oxygen that is
used to complete combustion)
– Low tension surface (better surface, no need to treat models with
spray or dip baths)
– Excellent dimensional stability in time, no need to stock in cold/dark places
– Available for low power LCD, DLP and laser printers
– Shelf life 2 years

 

X5 FOR LCD/ DLP – BLUECAST CASTABLE RESIN 0.5kg

£108.33 Inc VAT

 

X5 CASTABLE RESIN.

BCX5 is the latest castable resin for LCD/DLP, suitable for jewelry where extreme precision and accuracy are required.

The main features are:

– Custom syntetized oligomer by BlueCast, not available to market,
patent is going to be applied.
– Excellent casting of small engravings both positive and negative
– Fits all jewelry needs from filigree to medals as well dental ones
– Excellent for stones presetting
– Curing triggering tuned to maximize antialias smoothing
– No monomer inside, no smell
– No aggression on plastic parts (tested on PS, PMMA)
– No postcuring needed for casting
– No shrinkage
– No primer needed
– Less sprueing needed, oxygen for burnout is released by resin during
burnout (less scrap metal, less work on metal)
– Easy welding with wax, forget about pattern lost into investment
– Can be polished, engraved, drilled (postcure is needed)
– Low viscosity, easier to recover uncured resin from models, easy to wash
– No preheating required
– Very little hygroscopic while liquid, no water absorption while printed
– Atoxic, solvent free, very low phospine content, very low skin irritant
– Fast and detailed
– Hard but elastic, good compression set
– Cleaner burnout, 0,00% ash residual
– Solvent free
– Suitable for fast burnout
– Full burnout also at lower temperature (750 C°)
– No expansion during burnout, sublimation starts at 130 Celsius
– Burnout will not release agrressive chemicals to investment (80% of
burnout is composed by carbon dioxide and water and oxygen that is
used to complete combustion)
– Low tension surface (better surface, no need to treat models with
spray or dip baths)
– Excellent dimensional stability in time, no need to stock in cold/dark places
– Available for low power LCD, DLP and laser printers
– Shelf life 2 years

Compatible with Wanhao Duplicator 7